Deletion Of The Application Program - Datalogic F732 WIZARD Bedienungsanleitung

6
6.3

DELETION OF THE APPLICATION PROGRAM

CAUTION
If the application is to be changed, it is necessary to first delete the application
currently in use as indicated below.
1- Press <SCAN> and the protected
RESET key
display screen will show:
2- To proceed with the deletion, press
the ▲ key; after a few seconds, the
display screen will show:
Now, you
application program using either
EasyGen™ (see par. 4.2.7) or
DOSDL.EXE (see Appendix B).
74
The procedure described below will entail the deletion of the
data acquired and of the application software even if the
procedure is not completed.
simultaneously;
can load another
the
EASYGEN™