Datalogic F732 WIZARD Bedienungsanleitung Seite 164

DOSDL
A list of all application tables ("INP" extension) present in the current directory
appears on the monitor (it is possible to change directories):
Select the desired table and press <ENTER>; the following appears on the monitor:
Key:
A) File name and size
B) Loading status bar
C) Reply message
To interrupt the installation of a table at any time, just press <CTRL>+<BREAK> on
the computer's keyboard.
It is also possible to load the table using DOSDL.EXE directly from the DOS prompt.
Enter the command:
if the COM1 serial port is used
if the COM2 serial port is used.
To load the actual table .DAT files to the Formula terminal, it is necessary that they
are also present in the same directory. They will then be automatically loaded with
the table .INP files.
DOSDL /f filename.INP
DOSDL /L2 /f filename.INP
B
103