Datalogic F732 WIZARD Bedienungsanleitung Seite 125

EASYGEN™
6
ESC KEY: used in the "Data display" mode (see 6.2.3).
SHIFT KEY: Enables the entry of alphabetical characters
(written in white on the keyboard) when followed by the
pressing of a numeric key: for example if you want to enter the
alphabetical character "A", you have to press <SHIFT>+<7>.
The number of times the SHIFT key is pressed determines the
choice of alphabetical character: for example if you want to
enter the alphabetical character "N", you have to press
<SHIFT>+<SHIFT>+<5>, if you want to enter the alphabetical
character "X", you have to press
<SHIFT>+<SHIFT>+<SHIFT>+<2> and so on.
The fourth time the SHIFT key is pressed, the SHIFT function is
disabled. The SHIFT function can also be disabled by waiting
for a time-out of 2 seconds after being pressed.
By pressing the <SHIFT> key followed by the <RIGHT ARROW>
key, the graphic display's contrast increases to the allowed
maximum, and then returns to 0 value.
By pressing the <SHIFT> key followed by the <LEFT ARROW>
key, the back-lighting will be turned on/off. This function is not
available in F732 terminal.
ALPHANUMERIC KEYBOARD: Enables the numeric characters
to be entered and displayed. If the <SHIFT> key was pressed
previously, the choice of alphabetical character (written in white
on the keyboard) is enabled.
BACKSPACE KEY: deletes the last character entered.
SPACE KEY: Introduces a space. If the <SHIFT> key was
pressed beforehand, the choice of optional characters is made
possible.
ENTER KEY: allows validation of what has been typed.
64