Datalogic F732 WIZARD Bedienungsanleitung Seite 225

4
Protocol
ID
Mode
Term. from... to
Group
40
Identifying number (from 101 to 199) given to each satellite.
Allows you to define the method of connection to the
system:
0 - Network =
1 - Transmit Immediate = Single
2 - Test site survey =
3 - Test echo =
4 - Test RSSI =
is necessary to indicate the first and last identifying number
in the group of terminals managed by each satellite.
If one terminal must transfer data within the coverage range
of different satellites, its identifying number should be
included in each group.
Numerical value from 1 to 6 which allows management of
different satellites (communicating with the same terminal)
to be distinguished, so that no problems arise in the
overlapping coverage zones.
The polling operation requires the system to know which
satellites share or not radio overlapping coverage zones. To
get this information it is necessary that the satellites are
divided into different groups. The satellites of each group
must not share overlapping coverage and communicate with
the same terminals at the same time.
This procedure allows the different groups to be activated
alternatively, so that they never contain two satellites polling
the same terminal at the same time. Furthermore, by giving
the same group number to satellites communicating with
different terminals,
simultaneously.
RS-485 connection with Sysnet
network;
RS-232
without the
transmission protocol;
Reserved
procedure;
Reserved
procedure
Reserved
procedure.
the connection
SYSTOOLS™2001
connection
support of
for the testing
for the testing
for the testing
can take place
a