Datalogic F732 WIZARD Bedienungsanleitung Seite 223

4
This option is only available in Standard/Enhanced mode.
This button allows the terminal initial Setup.
Once the terminal configuration is set in the "Terminals" folder, this button allows to
send it to the relative terminal. Together with this configuration the transmission
parameters are configured again in the terminal by referring to the "General" folder
values.
The displayed dialog box allows to confirm or not (for special use) the transmission
parameters.
ATTENTION
38
To program a correct initial Setup, ensure that the terminal has
been previously set to the default values. This Setup occurs if a
Standard or Enhanced application program is sent to the
terminal or by reading the "return to default parameters"
barcode in the "Menu & Commands booklet". Then, ensure that
the terminal is the only one accessible in the network.
SYSTOOLS™2001