6
6 EASYGEN INTERPRETER PROGRAM
In this chapter the images representing the Formula terminal are only
used as examples to demonstrate use of the keys and messages
appearing on the display.
NOTE
6.1
INTERPRETER PROGRAM USE
Application programs created by EasyGen™ can be run on the Formula terminal only
if the EIxxx_yyy.HEX interpreter program has been previously loaded onto the
terminal.
Some example application programs are installed onto the PC and can be loaded
onto the Formula terminal using either EasyGen™ (see par. 4.2.7) or DOSDL.EXE
(see Appendix B).
6.2
USE OF THE FORMULA TERMINAL
Once the application software is loaded onto the Formula terminal (either an example
supplied or an application developed with EasyGen™) to launch it, it is necessary to
extract the Formula terminal from the cradle and press <SHIFT> and then the <UP
ARROW> key.
If the barcode scanning function has been used in the application, scanning is
possible.
62
EASYGEN™