Datalogic F732 WIZARD Bedienungsanleitung Seite 107

5
−
EAN128 & CODE 128
By enabling CODE 128 codes, it is possible to read, not only normal CODE 128
barcodes, but also single field EAN 128 codes.
By enabling EAN 128 codes, it is possible to read, not only single field EAN 128
barcodes, but also CODE 128 codes.
To correctly read EAN 128 codes of more than one field, it is
necessary to create the special EAN128tb table. (See par. 4.6.1).
This table must have a number of fields greater than or equal to the
maximum number of fields to be read.
The EAN 128 code content will ALWAYS be assigned to the
EAN128tb table. The code fields will automatically be separated and
saved in their respective fields defined in the table, always starting
from the first field.
NOTE
The EAN128tb table is made up of ONLY one record. Therefore it is
necessary to save this data elsewhere before reading a new code
(otherwise it will be overwritten).
Enabling multiple code types simultaneously
−
If data is to be saved in the EAN128tb table, all other code types read (different
from EAN 128) will be saved in the specified field of the EAN128tb table.
−
If data is to be saved in a table other than EAN128tb (for example "table1"), all
other code types read (different from EAN 128) will be saved in the specified
table.
To test a program that allows reading EAN 128 codes using the simulator (see par.
4.5):
−
use the "|" (Pipe) character as the first character of the code
−
use the "|" (Pipe) character as the field separator (instead of character 'GS')
For example: "|ONE|TWO|THREE"
46
EASYGEN™