Inhaltsverzeichnis
Werbung
INSTALLATION
To connect the Formula cradle to the host computer, proceed as indicated below:
1.
connect the serial port of the host computer to cable 94A054000 for 9-pin
connections or to cable 94A054010 for 25-pin connections;
2.
connect the other end of the same cable (RJ connector) to the RS-232 port of
the cradle;
3.
insert the power-supply plug into the jack on the base of the cradle;
4.
attach the power supply to a power outlet;
5.
turn on the cradle and the computer;
6.
put the Formula terminal into the cradle.
PowerSupply
2
5
Quicklinks ausblenden:
Werbung
Kapitel
Inhaltsverzeichnis
Fehlerbehebung
