Datalogic F732 WIZARD Bedienungsanleitung Seite 94

MENU DESCRIPTION
Each field is distinguished by:
Number
The number is a progressive number which uniquely identifies a field and
corresponds to the order in which it is sent to the Formula terminal.
Name
The name of the field is an alphanumeric field with a maximum length of 10
characters.
Type
The field type may be selected from:
−
Normal (for example code, price, location, ...)
−
Time (internal to the terminal) contains the time in the format hh:mm:ss. Any
time a record is updated, the time will be automatically updated as well.
−
Date (internal to the terminal) contains the date in the format dd/mm/yy. Any time
a record is updated, the date will be automatically updated as well.
For each field of type Normal it is possible to define:
−
Alignment
It is possible to define the alignment of data within the field, whenever the fill
character is not defined as being equal to zero.
−
Fill
The character to be used to complete acquired data (if the data has a length
shorter than the field length).
Space Data is considered to be alphanumeric.
Zero Data is considered to be numeric and the alignment is set flush right.
This selection assumes relative importance when the data is used (for
example, equivalence tests and arithmetic operations).
−
Size
It is possible to enable control of the length of data to be inserted into the field.
Control is done by verifying whether the length is within the defined value.
The maximum length allowed is 32 characters.
Length control is disabled as the default.
4
33