Datalogic F732 WIZARD Bedienungsanleitung Seite 131

6
Once a code is found, it is possible to continue searching toward the beginning of the
data table <UP ARROW> or toward the end of the data table <DOWN ARROW>. If
other fields with that code are present, they will be displayed.
Once the code searched for is found, it is
possible to modify its contents simply by
inserting a new value and confirming it
pressing <ENTER>. By doing this, "Edit"
mode is entered and the figure indicates
what appears on the display screen.
If the number of characters entered is
less than the length of the field, it is filled
by a series of zeroes (0).
If the code is not found, the figure
indicates what appears on the Formula
terminal's display screen.
Press <ESC> to exit the "Search" mode.
ATTENTION
70
There should not be more than three consecutive empty
records during the data search phase, otherwise the current
operation will be terminated.
EASYGEN™