2
2.3
LOADING EASYGEN™ INTERPRETER
Load the EasyGen Interpreter Program EIXXX_YYY.HEX onto the Formula
terminal with the EasyGen command "INITIATE" (see par. 4.7). You can also load
the EasyGen™ Interpreter Program with a DOS system using the DOSDL.EXE
program (see Appendix B). Before proceeding with this operation verify if another
interpreter program has been previously loaded. In this case it is required to delete
the program by using the shielded reset key (see par. 6.2.1 and par. 6.4 for details).
2.4
LOADING A SAMPLE PROGRAM
Select an EasyGen sample application, the simplest one is "EXAMPLE1.APP"
found in the "Installation Directory \ Examples \ Your Language \ EXAMPLE 1
(Code+Quantity)", and load it onto the Formula terminal using the "SEND" command
(see par. 4.2.7 for details).
You should be able to run the loaded application on the Formula terminal. The
example application "EXAMPLE1.APP" helps you to build a program which stores
collected barcodes, date and time in a table.
To collect data from the sample application, use the SysTools™2001 program.
Follow the SysTools™2001 User's Manual for details on how to install and use this
program to collect data from Formula terminals.
6
EASYGEN™