VOLTCRAFT T6200 Bedienungsanleitung Seite 55

Proceed as follows to use the data memory:
• Connect the charger to the power supply so that the start
display is visible.
• Touch the button „PRESET".
The display switches to the storage display in which the five
individual storages (1 - 5) are displayed with the currently set
values (rechargeable battery type, cell number and charge/
discharge current.
• Tap one of the five memory slots and the data stored there
will be assumed as the current settings.
• For inspection, the header bar of the starting display displays
not only the rechargeable battery data but also the number of
the memory slot called (P1 ... P5).
54
Figure 12