4. Input field „CELLS"
Touch this input field to enter the cell number of the rechargeable battery or the battery pack.
5. Input field „CAPACITY"
Touch this input field to set the capacity of the battery to be charged. At the same time, the recommended charge
and discharge current is set as well. However, you can change both currents individually and thus adjust them to the
rechargeable battery perfectly.
6. Input field „SETTINGS"
If you activate this field, the system settings of the charger and comprehensive safety and charging parameters can
still be changed individually.
7. Input field „PRESET"
The charger has five memory slots in which the individual data of your most frequently used rechargeable batteries
can be stored. Use the „PRESET" function to call and set memory slots.
8. Input field „START"
By activating this input field, the currently set charger function is started or activated.
48