Befehle Für Proben; Triggerbefehle - Keysight Technologies Truevolt Series Servicehandbuch

Befehle für Proben
SAMPle:COUNt {<count>|MIN|MAX|DEF}
SAMPle:COUNt? [{MIN|MAX|DEF}]
SAMPle:COUNt:PRETrigger {<count>|MIN|MAX|DEF}
SAMPle:COUNt:PRETrigger? [{MIN|MAX|DEF}]
SAMPle:SOURce {IMMediate|TIMer}
SAMPle:SOURce?
SAMPle:TIMer {<interval>|MIN|MAX|DEF}
SAMPle:TIMer? [{MIN|MAX|DEF}]

Triggerbefehle

ABORt
INITiate[:IMMediate]
OUTPut:TRIGger:SLOPe {POSitive|NEGative}
OUTPut:TRIGger:SLOPe?
READ?
SAMPle:COUNt {<count>|MIN|MAX|DEF}
SAMPle:COUNt? [{MIN|MAX|DEF}]
SAMPle:COUNt:PRETrigger {<count>|MIN|MAX|DEF}
SAMPle:COUNt:PRETrigger? [{MIN|MAX|DEF}]
*TRG
TRIGger:COUNt {<count>|MIN|MAX|DEF|INFinity}
TRIGger:COUNt? [{MIN|MAX|DEF}]
TRIGger:DELay {<seconds>|MIN|MAX|DEF}
TRIGger:DELay? [{MIN|MAX|DEF}]
TRIGger:DELay:AUTO {OFF|ON}
TRIGger:DELay:AUTO?
TRIGger:LEVel {<level>|MIN|MAX|DEF}
TRIGger:LEVel? [{MIN|MAX|DEF}]
TRIGger:SLOPe {POSitive|NEGative}
TRIGger:SLOPe?
TRIGger:SOURce {IMMediate|EXTernal|BUS|INTernal}
TRIGger:SOURce?
Keysight True volt Series Bedienungs- und Servicehandbuch
SCPI-Programmierreferenz
461