Voltage Input / External Power Supply; Digital Outputs; Relay Outputs; Analog Outputs - KEB COMBIVERT F5 MULTI Betriebsanleitung

Installation and Connection

2.2.5 Voltage Input / External Power Supply

The supply of the control circuit through an external voltage source keeps the control in operational condition even
if the power stage is switched off. To prevent undefined conditions at external power supply the basic procedure
is to first switch on the power supply and after that the inverter.
GB

2.2.6 Digital Outputs

2.2.7 Relay Outputs

In case of inductive load on the relay outputs a protective wiring must be provided (e.g. free-wheeling diode)!

2.2.8 Analog Outputs

2.2.9 Voltage Output

The voltage output serves for the setting of the digital inputs as well as for the supply of external control elements.
Do no exceed the maximum output current of 100 mA.
GB - 8
X2A
10 11
X2A
10 18 19 20
���
X2A
0...±10 VDC
max. 5 mA
X2A
10
17 18 19 20 21 22 23
+
20...30 V ±0 % / 1 A DC
stabilized
21 22 23
PE
max. 50 mA DC
for both outputs
�� �� �� �� �� ��
������������������������
1 2 3 4 5 6 7 8 9
18 19 20 21 22 23
+
ca. 24VDC / max. 100 mA
PE
��
PE
PE
-