General - KEB COMBIVERT F5 MULTI Betriebsanleitung

General

1. General
The frequency inverter KEB COMBIVERT F5-MULTI is a drive component, which is intended for installation in
electrical systems or machines. The frequency inverter is exclusively for stepless speed control / regulation of
three-phase asynchronous motors. The operation of other electrical consumers is not permitted and can lead to
the destruction of the unit.
KEB COMBIVERT F5-MULTI has very extensive programming options. To make the operation and start-up simpler
for the user, a special operator level was created in which the most important parameters are found. However, if
GB
the parameters pre-defined by KEB are not sufficient for your application an application manual is available.
GB - 4