Herunterladen Inhalt Inhalt Diese Seite drucken

Storage; Transport; Disposal And Recycling - Scheppach DP3000 Originalbetriebsanleitung

Motorbetriebener muldenkipper
Vorschau ausblenden Andere Handbücher für DP3000:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
• Clean the unit regularly with a damp cloth and some
soft soap. Do not use cleaning agents or solvents;
they may damage the plastic parts of the appliance.
Make sure that no water can get inside the unit.
Please note that the following parts of this product are
subject to normal or natural wear and that the following
parts are therefore also required for use as consuma-
bles.
Wear parts*: spark plug, belt
* Not necessarily included in the scope of delivery!

10. Storage

1.
Perform all general maintenance, which are in the
User's Guide in the Maintenance section.
2.
Let the fuel out of the tank (Use a commercially
plastic fuel pump from the hardware store).
3.
After the fuel is drained, start the machine.
4.
Let the machine in idlespeed running until it stops.
That cleans the carburetor from the remaining fuel.
5.
Let the machine cool down. (about 5 minutes)
6.
Remove the spark plug.
7.
Fill a small amount of 2-stroke engine oil into the fi
ring chamber. Pull out several times the starter cord
gently to wet the internal components with the oil.
8.
Replace the spark plug.
9.
Clean the outer casing of the machine.
m Do not use strong detergents or petroleum based
cleaners when cleaning plastic parts. Chemicals
can damage plastics.
10. Store your machine on a straight bottom in a clean,
dry building with good ventilation.
m Do not store the machine with fuel in a non-
ventilated area where fuel fumes may reach flame,
sparks, pilot lights or any ignition sources.
Recommissioning
1.
Remove the spark plug.
2.
Pull the starter rope out several times. It cleans the
fi ring chamber of oil residues.
3.
Clean the spark plug contacts or install a new spark
plug.
4.
Fill the tank.
 www.scheppach.com  service@scheppach.com  +(49)-08223-4002-99  +(49)-08223-4002-58

11. Transport

m WARNING
Let the engine cool down before transporting the ma-
chine or storing indoors to avoid burns or fi re hazards. If
you want to transport the unit empty the fuel tank before.
Clean the unit with a brush or a broom of coarse dirt.

12. Disposal and recycling

The disposal instructions are based on icons placed on
the appliance or its package. A description of the indi-
vidual meanings, is shown in chapter "Explanation of
symbols on the device".
Transport package disposal
The package protects the appliance against damage
during transport. Packing materials are usually chosen
depending on their environmental friendliness and dis-
posal method and can therefore be recycled. Returning
the package to material circulation saves raw materials
and reduces waste disposal costs.
Parts of packages (e.g. foils, styropor®) can be danger-
ous to children.Risk of suffocation! Keep parts of pack-
ages away from children and dispose them as soon as
possible.
29 I 108

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

5908802903

Inhaltsverzeichnis