Endress+Hauser Proline Promag 10 Betriebsanleitung Seite 85

Promag 10
Messstoffdruckbereich
(Nenndruck)
Endress+Hauser
Promag D
• EN 1092-1 (DIN 2501)
– PN 16
• ANSI B 16.5
– Class 150
• JIS B2220
– 10 K
Promag L
• EN 1092-1 (DIN 2501)
– PN 10 (DN 50...300)
– PN 16 (DN 50...150)
• EN 1092-1, loser Blechflansch
– PN 10 (DN 50...300)
• ANSI B 16.5
– Class 150 (2"...12")
Promag W
• EN 1092-1 (DIN 2501)
– PN 6 (DN 350...2000)
– PN 10 (DN 200...2000)
– PN 16 (DN 65...2000)
– PN 25 (DN 200...1000)
– PN 40 (DN 25...150)
• ANSI B 16.5
– Class 150 (1"...24")
– Class 300 (1"...6")
• AWWA
– Class D (28"...78")
• JIS B2220
– 10 K (DN 50...300)
– 20 K (DN 25...300)
• AS 2129
– Table E (DN 80, 100, 150...1200)
• AS 4087
– PN 16 (DN 80, 100, 150...1200)
Promag P
• EN 1092-1 (DIN 2501)
– PN 10 (DN 200...600)
– PN 16 (DN 65...600)
– PN 25 (DN 200...600)
– PN 40 (DN 25...150)
• ANSI B 16.5
– Class 150 (1"...24")
– Class 300 (1"...6")
• JIS B2220
– 10 K (DN 50...300)
– 20 K (DN 25...300)
• AS 2129
– Table E (DN 25, 50)
• AS 4087
– PN 16 (DN 50)
Technische Daten
85