Herunterladen Inhalt Inhalt Diese Seite drucken

Sharp VC-ME80GM Bedlenungsanleitung Seite 9

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 54
INSTALlING YOUR VCR
AUTO INSTALLATION
SATELLITE RECEIVER
I
CABLE BOX CONTROL
Ifyau have a satellite receiver or cable box connected to your VCR you can automatically
install the satellite channels using this feature. The installation procedure for cable boxes is the
same as for satellne receivers (for cable box connections refer to your cable box manual).
Follow steps 1-4 below before INSTALLATION PROCEDURE:
1.Connect your satellite receiver to the VCR as previously shown.
2. Place the satellite receiver near the VCR (ideally on the top), This ensures that the reflected
infrared signals from the VCR which control the satellite receiver can reach
it
unimpeded.
3. Ensure all the channels you wish to be tuned are within channel positions
1~99
on your
safellite receiver as the VCR will only tune the first 99 channels - refer to your satellite
receiver operation manual for instructions on moving channels.
4. Ensure the receiver is not in any special mode.
• The satellite chon nels can now be tuned in as port of the outo·instollotion procedure. You
will
be
prompted for further informotion from the on·screen displays.
• SHARP connot guarantee this feature will work with 011 satellite receivers and coble boxes.
•. See the list of satellite receiver manufacturers codes at
the end
of this manual.
tQ
AU.iI1forrTldtton
INSTALLAnON PROCEDURE
These models outomoticolly tune the 1Y chon nels for your oreo, then using Teletext
information sort the TV channels into a standard order and set the clock.
• Ensure the VCR is connected as previously shown.
• Turn the TV on and select the video channeL
• Press STOP to switch on your VCR.
If the VCR has not previously been tuned-in,
instructions will be given on screen to guide
you through this procedure.
If the screen opposite appears when the video
is first switched on, press SET to confirm and
start from point 4 on the next page.
If the screen opposite does not appear when
the video is first switched on, start from point 1
on the next page.
.
GB-7

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis