Sharp VC-ME80GM Bedlenungsanleitung Seite 28

ADVANCED OPERATION
BASIC EDITING
ASSEMBLE EDITING
To cut out unwanted scenes while using the procedure on the previous page press the
PAUSE
button on the recording VCR at the start of the unwanted section and again at the
end fa resume recording.
NOTE:
•
Ens~r~ q~to
or
mon~ollrockih\l
hqs
b~.n
cqmpleteq
on th~
ploybock VCR
befqr~
c:;ommencing editing.
INSERT EDIT
1. Switch on the TV and select the video channel.
2. Press INPUT SELECT on the remote control to seled the video/audio input, 12 or L3 will
be disployed on the VCR.
3. load the source lape into the
playback
VCR or camcorder ensuring that the record
protection tab has been removed. Search the source fape on the playback VCR or
camcorder for the playback start position and select pause.
4. load the tape to be recorded into your VCR, ensure the record protection tab is in place
and that the HiFi Rec level Control is in its central position.
Search the tape to be recorded for the end of the scene to be replaced and select pause.
5. Press COUNTER RESET.
II~II
6. Rewind the tape to the start of the section to be replaced and press PAUSE.
7. Press the INSERT button
TO REPLACE PRESS
Picture and
VIDEO INSERT
Hi-Fi sound
V.INSERT oppeors on the VCR display and on the
TV screen.
Mono sound only
AUI)IO INSERT
A.INSERT oppeors on the VCR display and on the
TV screen.
Picture Hi-Fi and
VIDEO INSERT then AUDIO INSERT
Mono Sound
AV.lNSERT appears on the VCR display and on
the TV screen.
8. To start editing press PAUSE on the recording VCR ond PLAY on the playback VCR
simultaneously. When the tape counter reaches
0:00.00
the recording VCR will pause
automatically. Press stop on the ploybock VCR.
GB-26