Sharp VC-ME80GM Bedlenungsanleitung Seite 19

BASIC OPERATION
HOW TO USE
SHOWVUW
TO MAKE A RECORDING
• If
E!l
appears on the VCR display, press TIMER ON/OFF before starting.
• Check that the cbck is displaying the correct time.
• Ensure a video tape is inserted into the VCR and the Hi-Fi Ree Level Control is in its central
position.
SHOWVIEW allows you to program the VCR to record up to eight programmes using the
SHOWViEW numbers published in TV listings.
1. Press [SV/V+
I
on the remote control.
2.Enter the SHOWVIEW number from the TV
listing using the NUMBER BUTTONS.
NOTE:
.J\nER~()RTl1essa~e,wnlappedr
itrou
h~~~ ~f1tereda
number that is nota
cur~ent
SHOWVIEW number. If this happens press CLEAR to delete the numbers as required
and enter the correct SHOWVIEW number
3. Press [ ...,...,
I
to select ONCE, WEEKLY, DAilY.
4.lf you want to make additional recordings at the same time each day or week, then use
[
"'/~
I
to select the WEEKLY, or DAilY option as appropriate.
5. Press SET to confirm.
NOTE:
• Check that the menu list agrees with the times shown in the TV listing. If it does not press
CLEAR to return to the SHOWVIEW menu, and re-enter the correct SHOWVIEW number.
The first time that you use SHOWVIEW to
make a recording on each channel Preset,
(PRJ may be highlighted on the menu.
6. Enter the che nnel you wish to record
using the NUMBER BUTTONS, for
example iF you Wish to record channel 2
press 0 2. The VCR will remember this
for the Future.
NOTES:
You may also access the SHOWVIEW menu by the following procedure
i.
Press MENU.
ii. The SHOWVIEW option will be highlighted. Press
SET to confirm.
Continuefrornstep 2above~
GB-17