Sharp VC-ME80GM Bedlenungsanleitung Seite 8

INSTALLING YOUR VCR
TUNING THE TV INTO THE VCR
IMPORTANT NOTE: By pressing the STANDBY button, the VCR will toggle
between STANDBY and
LOW
POWER modes. The VCR display will not be
illuminated in low power mode.
1. Ensure your VCR is still in the STANDBY
mode
Inot
low power!.
2. Switch on the lV. Select an unused
channel on your
N
for your VCR (there
may be a dedicated video channel refer
to your
TV
operation manual).
3. Press and hold the
MENU
buffan for
3
e.g.
seconds. The VCR will search and
display the ideal RF channel.
4. Tune the selected channel on your TV
(refer to your
TV
manual) until the menu
screen appears.
5. Press SET to store the RF channel and to
place the VCR bock into STANDBY.
NOTE:
If you have a 'preferred channel,
Step 3 using
L""/T )
keys.
../ The TV is tuned to the VCR.
GB-6