Sharp VC-ME80GM Bedlenungsanleitung Seite 27

ADVANCED OPERATION
BASIC EDITING
Connections
S-YIDEO
The conventional video sockets of VCRs For output and input are the luminance
signallYj
and
colour signal
(CJ
combined, which are recorded on the video tape. The S-Video Socket
allows separate transmission of signals to enhance picture clarity.
NOTE:
• This VCR does not playback or record S-VHS format video tapes.
LANC
The Local Application Control Bus System or
LANe
jack can be used for controlling the tape
transport of other/video equipment connected to
it.
1. Switch on the Nand seled the video channel.
2. Press INPUT SELECT an the remote control to select the video/audio input, L2 or L3 will
be displayed on the VCR.
3. load the source tape into the
playback
VCR or camcorder ensuring that the record
protection tab has been removed. Search the source tape on the playback VCR or
camcorder for the playback start position and select PAUSE.
4. load the tape to be recorded into your VCR , ensure the record protection tab is in place
and the HiFi Rec Level Control is in its central position. Search the tape to be recorded for
the start position and select PAUSE.
5. Press REC to place your VCR into RECORD PAUSE.
6. To start editing press PAUSE on the recording VCR and PLAY on the playback VCR
simultaneously.
7. To stop the editing process press the STOP buttons on both units.
GB-25