Sharp VC-ME80GM Bedlenungsanleitung Seite 33

ADVANCED OPERATION
BASIC EDITING USING A LANC CONNECTION
INSERT EDIT
1. Switch on the lY and select the video channel.
2. Press
INPUT
SELECT on the remote control to seled the
video/audio
input, L2 or L3
will be displayed on the VCR.
3. Load the source tape info the playback VCR or camcorder ensuring that the record
protection tab has been removed.
4. Load the tape to be recorded into your VCR, ensure the record protection tab is in place
and ensure the HiFj Ree Level Control is in
ifs
central position.
5. Press LANC REMOTE on the recording VCR, LANC REMOTE will appear on the VCR
display. This will allow you to control the playback VCR from the recording VCR.
6. Press Play/x2 then using the
SHUrrLE
DIAL find the next starting point on the tape in
the playback VCR. [refer to SHUTTLE DIAL OPERATION!
7. Press
LANC REMOTE on the recording VCR, LANC REMOTE will disappear fram the.
VCR display.
8. Press Ploy/x2 then using the SHUTTLE DIAL find the next starting point on the tape
in the recording VCR. Irefer to SHUTTLE DIAL OPERATION!
9. Press
COUNTER RESET.
111001
10. Using the JOG SHUTTLE DIAL rewind the tape to the start of the section to be
replaced and press PAUSE.
11 . Press the
INSERT
button.
TO REPLACE PRESS
Picture and
VIDEO INSERT
Hi-Fi sound
V.INSERT appears on the VCR display and on the
1V
screen. .
Mono sound only
AUDIO INSERT
A.INSERT appears on the VCR display and on the
TV screen.
Picture Hi-Fi and
VIDEO INSERT then AUDIO INSERT
Mono Sound
AV.lNSERT appears on the VCR display and on
the TV screen.
The EDIT STANDBY indicator wililig hI.
12. Press EDIT START/STOP to start editing. When the tape counter reaches 0:00.00
both VCRs will stop automatically.
13.To stop editing press the EDIT STANDBY bunon.
GB-31