Sharp VC-ME80GM Bedlenungsanleitung Seite 38

ADVANCED OPERATION
SEARCHING THE VIDEO TAPE
SKIP SEARCHING THE VIDEO TAPE
You can search the tape in 30 second time intervals. To do this follow the procedure below:
I.Press PLAY /X2
1 ~
Ito start the video tape playing.
2. Press SKIP SEARCH on the remote
control. The number of times you press
SKIP SEARCH determines the forward
search time.
• After searching, normal playback
will
resume automatically.
DIGITAL PROGRAMME SEARCH SYSTEM (DPSS)
1 press
=
30 seconds.
2
presses
=
1
minute.
3
presses
=
1
minute
30 seconds.
4
presses
=
2
minutes.
Your VCR records a marker signal on the tape at the start of each recording. These signals
can be used later to locate the starting point of a recording.
Press
DPSS
41
I •
to locate a previous programme or the next programme.
For example,
I.
load the video tape into the VCR
2. Press
DPSS ... three times. A 3 will appear on the on-screen display, and the VCR will
fast forward to locate the third recording after the current one.
3. Press DPSS
@l
once. A ·1 will appear on the on-screen display and the VCR will rewind
to locate the beginning of the current recording.
Rewind DPSS Signals Fast Forward
Current tape position
4. To cancelthe search before it has finished, press STOP
I- )
or PLAY /X2
1
~
J.
GB-36