Sharp VC-ME80GM Bedlenungsanleitung Seite 29

ADVANCED OPERATION
AUDIO INSERT
RECORDING SOUND ON TO A VIDEO TAPE
This feature enables you to add narration or background music to a pre-recorded tape .
II
•
• The audio signal will be recorded on the mono track~ The Hi-Fi track will remain
unchanged.
C2=:=L:r;;:::::::::::::::::::::=~~~
AUDIO SOURCE.
If
c
microphone is to
be used, connect it to
your eudio equipment.
Connect your audio
equipment to
At)DIO IN L·R
terminals on the front of your
VCR.
1.
Connect the audio source to the AUDIO IN
L-R terminab on the front of the VCR as
shown above, IA seart connection to L2 can
also be used).
2.
Insert the pre-recorded tape into the VCR.
3. Press PLAY/X21'-) 10 view the recording.
4.
lfyau wish to listen to the original Hi-Fi track
while you are recording the new inserted
audio track you will need 10 set AUDIO MIX
to ON in the MODE menu.
S. Press PAUSE/STILL
III)
when you reach
the point on the tape where you want audio
insert to start.
6. Press AUDIO INSERT IA.INSERT will be
shown on your 1V and on the VCR display.)
7. Press PAUSE/STILL (II) to start audio
insert.
B. Press STOP
I- I
to finish audio
insert(A.INSERT will disappear from your
1V and on the VCR display)
GB-27
I
'-