Sharp VC-ME80GM Bedlenungsanleitung Seite 32

ADVANCED OPERATION
BASIC EDITING USING A LANC CONNECTION
1.
Switch on the TV and select the video channel.
2. Press
INPUT
SELECT on the remote control to select the video/audio input, L2 or L3 will
be displayed an the VCR.
3. Load the source fape into the playback VCR or camcorder ensuring that the record
protection tab has been removed. Search the source fape on the playback VCR or
camcorder for the playback start position.
4. Load th~ tape to be recorded into your VCR, ensure the record protection tab is in place
and the HiFi Ree Level Control is in its central position. Search the tape for position to start
recording.
5. Press EDIT STANDBY an your VCR. The EDIT STANDBY indicator will light and the
VCR will enter record pause mode, the playback VCR will also enter playback pause
mode.
6. Press the EDIT START/STOP bunon to start editing. The EDIT START/STOP indicator
will light.
7.
To stop editing press the EDIT START/STOP bunon. Then the EDIT STANDBY bunon.
be
REMOVING UNWANTED SCENES
Unwanted scenes can be cut out whilst making a copy
by
following steps 1 to 6 above then:
1. When you reach the scene you wish to leave out press EDIT START/STOP on the
recording VCR. The EDIT START/STOP indicator will go aut and both units will go into
pause.
2. Press LANC REMOTE on the recording VCR, LANC REMOTE will appear an the VCR
display. This will allow you to control the playback VCR from the recording VCR.
3. Using the SHUTTLE DIAL find the next starting point on the tape in the playback VCR
and ensure the playback VCR is in pause made. (refer to SHUTTLE DIAL OPERATION)
4. Press LANC REMOTE on the recording VCR, LANC REMOTE will disappear from the
VCR display.
5.Press EDIT START/STOP on the recording VCR, the EDIT START/STOP indicator will
light and the editing function will resume.
6.To stop editing press the EDIT START/STOP bunon. Then the EDIT STANDBY buncn.
G8-30