En User Manual; Technical Data - Zipro Powerhouse Bedienungsanleitung

EN

EN User Manual

Dear User,
Please read the following instructions before starting assembly
and first use of the device. This manual contains important information
regarding the safe use and maintenance of the equipment. Keep it for
future reference regarding maintenance or ordering spare parts.

TECHNICAL DATA

Weight
Operating temperature
Storage temperature
Maximum user weight
Maximum load (total)
Application class
Product standard (main)
Intended use
SAFETY
WARNING! The device can only be used in accordance with its intended
purpose, i.e. for training by adults. Any other use of the device may be
dangerous. The manufacturer cannot be held liable for damage caused
by improper use of the device.
• The device was designed and constructed
based on the latest knowledge in the field of safety. Hazardous
elements that could potentially pose a risk of injury have been
eliminated or relatively secured.
• Do not perform repairs or modifications on your own.
•
Once every one or two months, check that the screws, bolts and
nuts are properly tightened.
• In order to ensure lasting safety, check and maintain the
equipment regularly (i.e. once a year)
in specialized commercial establishment.
• All modifications to the device that have not been described
in this manual may cause damage or directly endanger the
health and life of the exercising person. Modifications to the
device may only be carried out by the manufacturer's service
personnel or persons trained by them in this regard.
• All devices are subject to continuous innovation to ensure high
quality.
For this reason, the manufacturer reserves the right
to make technical changes.
• Any questions or concerns regarding the equipment should be
directed to a specialized commercial establishment.
ATTENTION! People in the vicinity during the use of the equipment
should be warned of possible hazards. Exercise particular caution in the
presence of children.
ATTENTION! Before starting exercising, consult a doctor
to make sure you do not have any health contraindications to training
on the device. Based
on the opinion of a specialist, you can develop your training plan. An
improperly selected program or excessive exercise can be dangerous to
your health and life.
WARNING! Exhaustion during exercise can result in serious injury or
death. If you feel weak, stop exercising immediately.
ATTENTION! Strictly follow the instructions for conducting training
contained in this manual.
• When choosing a place to train, take into account ensuring safe
distances from possible obstacles. Do not place the equipment
near communication routes (roads, gates, passages, etc.).
• It is forbidden to use the equipment in close proximity
to the wall. The safety zone is 2000 mm and at least as wide as
the device.
ATTENTION! During the assembly of the device, be careful and do not
allow children to be nearby. Small parts (nuts, screws, etc.) are used
during assembly, which may be swallowed by them.
RESIDUAL RISK
• In a situation where fall protection is not used or is used, but
incorrectly, there is a residual risk, i.e. a person falling causing
abrasions, bruises, fractures or in the worst case, death.
6
29 kg
0 C to +40 C
° °
-10 C to +60 C
° °
120 kg
150 kg
Class H
EN ISO 20957-1; EN ISO 20957-4.
Bench training (adjustable) for
home use
• There is a residual risk of unintended overloading of the
exercising person caused by improper operation.
• The residual risk of suffocation cannot be excluded.
• The risk can be reduced by following the information
on safety contained in the instruction manual.
•
It cannot be ruled out that unintended or unauthorized use will
cause other, unconsidered risks,
and the considered risk was estimated incorrectly.
In the risk analysis, the assessment was based on the "current state of
the device." The assessment and control of the product show
that the probability of unacceptable risk is very low. The device (its
construction, method of operation and application) does not cause -
under normal conditions - unjustified risk for the exercising person or
third parties.
HANDLING MARKS ON TRANSPORT PACKAGING
1 – This side up. Do not overturn.
2 - Protect from falling.
3 - Protect from moisture.
4 - The product should be stored in a maximum number of layers
indicated on the bulk packaging. The value given in this manual is for
example only.
5 - It is necessary to return the used equipment to a recycling point.
6 – Heavy product.
The packaging has been marked with symbols indicating the correct
disposal method:
ENVIRONMENT
The device is delivered in packaging to protect it from potential
damage during transport. The packaging consists of unprocessed raw
materials and can be recycled. Dispose of these materials in the
appropriate colored containers for selective collection.
HANDLING
Before starting your workout, make sure the device is properly
assembled.
• Before starting your first workout, familiarize yourself
with all the functions and adjustment options of the device.
•
The device has components that may be exposed
to corrosion. For this reason, it is not recommended to leave it
in a damp room. Also, make sure that
the equipment is not exposed to water, drinks, sweat, etc.
• The device is intended for training only by adults and is
absolutely not a toy for children. If you allow children to use it at
your own risk, be sure to instruct them on proper use and
supervise them constantly.
• The equipment is not suitable for therapeutic purposes.
• Before starting each workout, check the correctness of the
safeguards and screw and plug connections.
EQUIPMENT MAINTENANCE
Perform regular maintenance on the device. Perform the following
activities at least every 20 hours of operation.
• Check the condition of components such as screws and nuts.
Make sure they are tightened well.
•
Wipe sweat from the device after each workout.
• Use only water to clean the device
with soap. Do not use cleaning agents.
• Store the device in a dry and warm place.
• Do not expose the device to sunlight.
ENVIRONMENT
The device is delivered in packaging to protect it from potential
damage during transport. The packaging consists of unprocessed raw
materials and can be recycled. Dispose of these materials in the
appropriate colored containers for selective collection.