Next Level Racing F-GT Elite 160 Bedienungsanleitung Seite 28

support@nextlevelracing.com
(T-NUT POSITIONS)
113
Install 1 x T-Nut into the bottom channel of the Left and Right Base Members.
114 Align the mounting holes on the Motion Brackets (Included with Motion Plus) with the threaded holes
on the Motion Plus.
115
Align the mounting holes on the Motion Brackets with the T-Nuts installed in Step 01, 02 and 113. Bolt
through and secure with 4 x M8 Bolts and Washers.
PARTS:
• • 2 x T-Nuts
PARTS:
• • 1 x Motion Plus
• • 2 x Motion Plus Brackets
• • 10 x Motion Plus Mounting
Hardware
PARTS:
• • 4 x M8 16mm Bolts
• • 4 x M8 Washers
54
WARNING
Please do not use power tools for assembly as over tightening can damage your frame.
If you require further support, consult the installation video or contact us at support@nextlevelracing.com
Please ensure T-Nuts are correctly placed within the extrusion.
Lay out and build the cockpit on a level surface.
The F-GT Elite 160 is a 2 person build.
Do not force parts together.
Avoid cross threading bolts.
Before adjusting parts, it is recommended to remove any electronics.
ASSISTANCE
bit.ly/nlrbuild
If you require further support with your product please
contact our friendly team at: support@nextlevelracing.com
55
Video Instruction: bit.ly/nlrbuild
ASSEMBLY
VIDEO