Next Level Racing F-GT Elite 160 Bedienungsanleitung Seite 10

support@nextlevelracing.com
14 Align the Pedal Bracket mounting holes with the T-Nuts previously installed in Step 13. Bolt through
and secure with 4 x M8 Bolts and Washers.
15
Align the through holes on the Pedal Arms (from Step 12) with the mounting holes on the Pedal
Brackets. Keep the laser line markings faced towards the centre.
16
Bolt through and secure with 2 x M8 Bolts, Washers, and Flange Nuts.
18
PARTS:
• • 2 x Pedal Brackets
• • 4 x M8 16mm Bolts
• • 4 x M8 Washers
17
PARTS:
• • NIL
18
PARTS:
• • 2 x M8 65mm Bolts
• • 2 x M8 Washers
• • 2 x M8 Flange Nuts
19
Align the slots and mounting hole on the Pedal Adjustment Fins with the T-Nuts previously installed in
Steps 01, 02, and 12.
Bolt through and secure with 4 x M8 Bolts and Washers, and 2 x M8 Shoulder Bolts.
Align the mounting holes on the Pedal Plates with the T-Nuts previously installed in Step 12. Use the
laser engraved lines on the Pedal Arms for easy alignment of the Pedal Plates.
19
Video Instruction: bit.ly/nlrbuild
PARTS:
• • 2 x Pedal Adjustment Fins
PARTS:
• • 4 x M8 16mm Bolts
• • 4 x M8 Washers
• • 2 x M8 Shoulder Bolts
PARTS:
• • 2 x Pedal Plates