Next Level Racing F-GT Elite 160 Bedienungsanleitung Seite 18

support@nextlevelracing.com
62
Remove the Rear Base Member.
A)
B)
63
A) Align the threaded holes on the Rear Base Member with the through holes on the front of the Left and Right Base Members.
B) Bolt through and secure with 6 x M8 Bolts and Washers.
A)
64
A) Align the mounting holes on the Front Panel with the through holes on the rear of the Left and Right Base Members.
B) Bolt through and secure with 4 x M8 Bolts, Washers and Flange Nuts. Install TPE Plugs into the centre through hole.
34
PARTS:
• • NIL
PARTS:
• • 1 x Rear Base Member
• • 6 x M8 45mm Bolts
• • 6 x M8 Washers
PARTS:
• • 1 x Front Panel
• • 4 x M8 40mm Bolts
• • 4 x M8 Washers
B)
• • 2 x TPE Plugs
BOTTOM MOUNT SEAT
INSTALLATION STEPS
A)
65 A) Uninstall the Bolts and Washers securing the Seat Brackets to the Seat Sliders.
B) Remove the Seat Brackets.
A)
66
A) Uninstall the Ratchet Handles securing the Seat Slider Assemblies to the Base Members.
B) Remove the Seat Slider Assemblies.
Video Instruction: bit.ly/nlrbuild
PARTS:
• • NIL
B)
PARTS:
B)
• • NIL
35