Next Level Racing F-GT Elite 160 Bedienungsanleitung Seite 14

support@nextlevelracing.com
SHIFTER ARM ADJUSTMENT
(MIRROR FOR RIGHT SIDE SHIFTER)
38
Loosen the Bolts securing the Shifter Arm Brackets to the Vertical Post and Shifter Arm Support.
Adjust to the desired height and tighten the Bolts to lock in place.
39
Align the mounting holes or slots on the Shifter Plate with the T-Nuts previously installed in Step 35.
40
Bolt through and secure with 4 x M8 Bolts and Washers.
PARTS:
• • NIL
(Bolts to Loosen)
PARTS:
• • 1 x Shifter Plate
PARTS:
• • 4 x M8 16mm Bolts
• • 4 x M8 Washers
26
41
Align the mounting holes on the Buttkicker Mount with the T-Nuts previously installed in Step 22.
42
Align the holes on the NLR Tool Kit Holder with the T-Nuts previously installed in Step 35. Bolt through and secure
with 2 x M8 Bolts and Nylon Washers. Place Allen Keys, Ratchet and Ratchet Tips in the Tool Kit Holder after use.
43
Install TPE Plugs into any empty through holes in the Left and Right Base Members. Repeat on other
side.
27
Video Instruction: bit.ly/nlrbuild
PARTS:
• • 1 x Buttkicker Mount
• • 2 x M8 16mm Bolts
• • 2 x M8 Washers
PARTS:
• • 1 x Toolkit Holder
• • 2 x M8 16mm Bolts
• • 2 x Nylon Washers
PARTS:
• • 10 x TPE Plugs
Repeat
on Other
Side