Next Level Racing F-GT Elite 160 Bedienungsanleitung Seite 27

support@nextlevelracing.com
MOTION PLUS PLATFORM INSTALL
(Rear setup)
Please complete Steps 59 - 64 before continuing.
108
Uninstall 4 x Adjustable Feet from the Left and Right Base Members.
B)
A)
109
A) Uninstall 6 x Bolts and Washers securing the Rear Base Member to the Left and Right Base Members.
B) Remove the Rear Base Member.
PARTS:
• • NIL
Tip: Use Allen key to loosen the
Adjustable Feet.
PARTS:
• • NIL
52
(T-NUT POSITIONS)
110
Install 2 x T-Nuts into the bottom channel of the Rear Base Member and slide to the marked locations.
A)
B)
111
A) Align the threaded holes on the Rear Base Member with the through holes on the Left and Right Base Members (Circled).
B) Bolt through and secure with 6 x M8 Bolts and Washers.
112
Align the mounting holes on the Motion Plus Pivot Bar with the T-Nuts installed in Step 01, 02, and
110. Bolt through and secure with 4 x M8 Bolts and Washers.
Video Instruction: bit.ly/nlrbuild
PARTS:
• • 1 x Rear Base Member
• • 2 x T-Nuts
PARTS:
• • 6 x M8 45mm Bolts
• • 6 x M8 Washers
PARTS:
• • 1 x Motion Plus Pivot Bar
• • 4 x M8 20mm Bolts (Included with
Motion Plus Platform)
(Part may vary)
• • 4 x M8 Washers (Included with
Motion Plus Platform)
Tip: Use Spanner tool included
with the Motion Plus Platform.
53