Next Level Racing F-GT Elite 160 Bedienungsanleitung Seite 15

support@nextlevelracing.com
Note: Refer to Page 8 for
how to install End Caps.
44
Install End Caps onto the end of each extrusion member.
45
Your F-GT Elite 160 is complete.
PEDAL PLATE ANGLE ADJUSTMENT
Note: Refer to Page 10 for
Shoulder Bolt adjustment.
46
Loosen the Shoulder Bolts securing the Pedal Adjustment Fins to the Pedal Arms and the Left and
Right Base Members. Adjust to desired angle and height. Tighten the Shoulder Bolts to lock in place.
28
PARTS:
• • End Caps
PARTS:
• • NIL
PARTS:
Formula Position
• • NIL
Hybrid Position
GT Position
Tip: Use Allen key to further
tighten the Shoulder Bolts for extra
strength.
SHIFTER PLATE ADJUSTMENT
47 Loosen the Bolts and Washers securing the Shifter Plate to the Shifter Arm. Adjust to the desired angle,
height and distance. Tighten the Bolts to lock in place.
DIRECT SHIFTER MOUNT
A)
B)
(INNER)
T-NUT LOCATIONS
(OUTER)
48
A) Install 2 x T-Nuts into each outer channel of the Shifter Arm and 1 x T-Nut into each inner channel.
B) Slide T-Nuts to the marked locations and install 2 x End Caps.
A)
49
A) Align the mounting holes on the Seat Bracket with the T-Nuts previously installed in Step 48.
B) Bolt through and secure with 2 x M8 Bolts and Washers.
29
Video Instruction: bit.ly/nlrbuild
PARTS:
• • NIL
PARTS:
• • 1 x Shifter Arm
• • 6 x T-Nuts
• • 2 x End Caps (40 x 80 Angled)
PARTS:
• • 2 x M8 16mm Bolts
B)
• • 2 x M8 Washers