Next Level Racing F-GT Elite 160 Bedienungsanleitung Seite 22

support@nextlevelracing.com
A)
80 A) Uninstall 4 x M8 Bolts and Washers securing the Seat Brackets to the Seat Sliders Members.
B) Remove the Seat Brackets.
A)
81 A) Remove 4 x Ratchet Handles securing the Seat Slider Tabs to the Right and Left Base Members.
B) Remove the Seat Slider assemblies.
)
B
)
A
Repeat
on other
side
)
C
A) Uninstall the End Caps at the rear of the Left and Right Base Members.
82
B) Install 2 x T-Nuts into the top channel of the Left and Right Base Members.
C) Re-install 2 x End Caps.
42
PARTS:
• • NIL
B)
PARTS:
• • NIL
B)
PARTS:
• • 4 x T-Nuts
83 Align the mounting holes on the Motion Brackets with the T-Nuts installed in Step 82. Bolt through
and secure with 4 x Ratchet Handles.
A)
B)
84 A) Uninstall 4 x M8 Countersunk Bolts securing the Seat Slider Tabs to the Seat Sliders.
B) Remove 6 x T-Nuts.
(
T-NUT LOCATION
( )
T-NUT LOCATION
( )
T-NUT LOCATION
85
Install 2 x T-Nuts into the top and bottom channel of each Seat Slider.
43
Video Instruction: bit.ly/nlrbuild
PARTS:
Repeat
• • 4 x Ratchet Handles
on Other
Side
PARTS:
• • NIL
PARTS:
• • 8 x T-Nuts
)
( )
T-NUT LOCATION