Next Level Racing F-GT Elite 160 Bedienungsanleitung Seite 23

support@nextlevelracing.com
86
Install 4 x End Caps onto both ends of each Seat Slider Member.
A)
Repeat
on other
side
87
A) Align the T-Nuts previously installed in Step 85 with the mounting holes on the Motion V3.
B) Bolt through and secure with 4 x M8 Bolts and Washers.
A)
88
A) Align the mounting slots on the Seat Brackets with the T-Nuts previously installed in Step 85.
B) Bolt through and secure with 4 x M8 Bolts and Washers.
44
PARTS:
• • 4 x End Caps (40 x 40)
PARTS:
• • 4 x M8 16mm Bolts
B)
• • 4 x M8 Washers
PARTS:
• • 2 x Seat Brackets
Repeat
on other
B)
side
• • 4 x M8 16mm Bolts
• • 4 x M8 Washers
TRACTION PLUS PLATFORM INSTALL
(Requires Elite Motion Adapter Upgrade Kit)
89
Remove 8 x TPE Plugs from the Left and Right Base Members.
A)
90
A) Uninstall 4 x M8 Bolts, Washers and Flange Nuts securing the Front Panel to the Left and Right Base Members.
B) Remove the Front Panel.
Video Instruction: bit.ly/nlrbuild
*SOLD SEPERATELY
PARTS:
• • NIL
PARTS:
• • NIL
B)
45