Transport Section - Yamaha MT400 Bedienungsanleitung

10
Q
ZERO STOP switch
Use this switch to turn on and off the Zero Stop function. With this switch set to on (ON), the
tape rewind automatically stops when the tape counter returns to just before "000".
R
Tape counter
This 3-digit tape counter indicates the tape position.
S
Counter reset button
This button resets the tape counter value to "000".
T
Cassette compartment
Insert a cassette tape here.

Transport Section

U
REC
Pressing this button turns the PLAY button
available tracks. When you press this button during playback, recording starts from the point
you press the button. This button is disabled if a tape is not set or write-protect tubs on the
tape are broken.
V
PLAY button (® ® ® ® )
Use this button to start playback of the tracks.
W
REW button (
Use this button to rewind the tape.
X
FF button (
Use this button to fast forward the tape.
Y
STOP button ( )
Use this button to stop the tape transport.
Z
PAUSE button ( )
Use this button to pause recording or playback. Pressing this button to stop recording or
playback and pressing it again will resume recording or playback.
—Owner's Manual
button ( )
)
)
REC PLAY REW FF STOP
U V W X Y Z
V
on and starts recording on the currently
PAUSE