Max Volume; Dsp Parameter; Memory Guard - Yamaha RX-V765BL Bedienungsanleitung

Changing various settings of this unit (SETUP menu)
4 Input Rename
You can change input source names to be displayed on the
front panel display.
You can select an input source that you want to change the
name to be displayed using kCursor.
Selecting a name to be displayed from templates
Select an input source that you want to change the name,
and select a name from the following templates using
kCursor.
– Blu-ray – Satellite
– DVD – VCR
– SetTopBox – Tape
– Game – MD
– TV – PC
– DVR – iPod
– CD – HD DVD
– CD-R – "blank"
y
• If you change the display name of an input source to your original one
and select the input source, the current input source name and the
template name are displayed. This is convenient if you want to cancel
name change operation.
Entering an original name
Select an input source that you want to name, and press
kENTER. You can enter up to 9 characters by selecting
one character at a time with the following keys according
to the following operation.
kCursor l / h For selecting characters that you
want to change
kCursor k / n
For selecting characters to be
entered
kENTER
For entering the selected characters
The following characters are available for input.
A to Z, 0 to 9, a to z, symbols (#, *, –, +, etc.) and space
5 Zone2
You can set the maximum volume level and initial volume
level of Zone2.
y
• This item is displayed only when "Extra SP Assign" is set to "Zone2."
■

Max Volume

Adjustable range: -30.0dB to +15.0dB / +16.5dB*
(5.0 dB steps)
Sets the maximum volume level of Zone2 so that the
volume will not be accidentally increased. For example,
you can adjust the volume between –80.0 dB and –5.0 dB
or mute when you set this parameter to "–5.0dB."
■ Init. Volume
Off*/Mute/-80.0dB to +16.5dB (0.5 dB steps)
Choices:
Sets the volume level of Zone2 when the power of Zone2
unit is turned on.
52
En
Note
• If the setting of "Max Volume" is lower than the setting of "Init.
Volume," the setting of "Max Volume" becomes effective. For example,
when you set "Max Volume" to "–30.0dB" and "Init. Volume" to
"0.0dB," the volume is automatically set to "–30.0dB" at the next time
this unit is turned on.

DSP Parameter

You can change some parameters for the sound field
programs. For details, see page 42.

Memory Guard

y
• The default settings are marked with "*."
Choices: Off*/On
Protects settings of SETUP menu against accidental
alteration.
Off
Does not protect settings.
On
Protects the settings of the SETUP menu
(except for the Memory Guard setting).
Note
• When this parameter is switched to "On," "G" appears while the SETUP
menu is displayed on the video monitor.