Technical Data For The Suprasorb - Lohmann & Rauscher Suprasorb Cnp P3 Gebrauchsanweisung

11 Technical data for the Suprasorb

therapy unit and EMC information
Aggregate suction power
Negative pressure
Containers
Power supply rated voltage
Maximum load current
Power supply line frequency
Power consumption
Battery, rechargeable
Charging time when battery is empty
Charging time with approx. 50% charge
Dimensions (H x W x D)
Weight (Suprasorb
®
unit with container)
Operating time
Degree of protection in accordance
with EN 60601-1
Risk class per Regulation (EU)
2017/745 Annex VIII, Rule 12
Protection class in accordance
with EN 60601-1
IP protection class
CE marking
Sound emissions
Ambient conditions
REF
* Maximum negative pressure fluctuations: The maximum value refers to sea level. It may vary depending on altitude and
atmospheric pressure. The multiplication factors listed in the table are employed to set the maximum negative pressure
based on the altitude and atmospheric pressure.
11 l/min
-20 to -200 mmHg*; conversion factor: 1 kPa ≈ 7.5 mmHg
Suprasorb
Suprasorb
100–240 V AC primary / 15 V DC
secondary 1.2 A
50/60 Hz
15 W (charging and operation)
10.8 V, 2.7 Ah – lithium ion
6–7 hours
3–3.5 hours
175 x 155 x 70 mm with Suprasorb
175 x 260 x 70 mm with Suprasorb
CNP P3 therapy 1.15 kg with Suprasorb
1.38 kg with Suprasorb
Mains: continuous operation
Battery: approx. 23 hours (at -80 mmHg/150 ml/min. leakage)
Type BF
IIa
II
IP23
CE0123
40 dB (A) (at -80 mmHg/50 ml/min. leakage)
Transport/storage: -10°C to +60°C
Operation: +5°C to +40°C
31780 / 34780
®
CNP container 250 ml
®
CNP container 1,000 ml
®
CNP container 250 ml
®
CNP container 1,000 ml
®
Recommended charging temperature:
+15°C to +30°C
10 to 80% relative humidity, non-condensing
Atmospheric pressure: 700 hPa to 1,060 hPa
CNP P3
CNP container 250 ml
®
CNP container 1,000 ml
®