Operation By Patient; Switching The Device On And Off; Screen Saver And Screen Lock - Lohmann & Rauscher Suprasorb Cnp P3 Gebrauchsanweisung

5 Operation by patient

Avoiding errors when the device is used by patients in their home environment
• Store the Suprasorb
case.
• Keep children and pets away from the Suprasorb
that the device is not knocked over and cannot fall down.
• Before connecting the power supply, ensure that the voltage of the device is the
same as that of the domestic mains power supply.
PLEASE NOTE
• Do not use the Suprasorb
or showers. Keep the power supply, plug and screen panel from getting wet. Never
immerse the Suprasorb
when switched off).
• Never shower or bathe with the Suprasorb

5.1 Switching the device on and off

5.2 Screen saver and screen lock

CNP P3 therapy unit incl. accessories in the Suprasorb
®
CNP P3 therapy unit in rooms with high humidity, baths
®
CNP P3 therapy unit in water or any other liquids (even
®
To switch the device on, press
below the screen on the Suprasorb
(see image). To switch the device off, hold the same key
down until the screen goes black.
Power supply On/Off
The LED of the on/off key is green when the device is
switched on.
The control LED for the power supply is green when the
device is connected to the mains power supply.
If the screen goes dark during therapy, it can be made
visible again by simply touching it. However, the editing
function will remain locked. To make changes, unlock by
pressing until
CNP P3 therapy unit to ensure
®
CNP P3 therapy unit connected!
®
. This key can be found
CNP P3 therapy unit
®
Signal off
appears.
CNP
®