Preset Therapy Mode; Changing Settings; Setting The Therapy Mode - Lohmann & Rauscher Suprasorb Cnp P3 Gebrauchsanweisung

4.4 Preset therapy mode

The preset therapy mode
appears after the start
screen; the therapy is
stopped.

4.5 Changing settings

The screen of the Suprasorb
unit is a touchscreen. The following changes
can be made here by simply touching the
symbols in the two toolbars (see red marking
in image of screens at end of Section 4.5):
Start of therapy
The therapy mode must only be set by
qualified healthcare professionals!
General settings
Locking function
CNP P3 therapy
®

4.6 Setting the therapy mode

Selecting
the screen shown to the left.
You can cancel the action
by pressing
your selection by holding
down
soon as the colour of the
small cog wheel changes
from grey to green, you can
start to input the therapy
settings.
Choose one of the two
therapy modes by selecting
the corresponding view –
Continuous or Intermittent –
using the arrow keys
The values are set in
intervals of 5 for the
pressure and 30 seconds
for the time.
takes you to
or confirm
for 3 seconds. As
.