Lohmann & Rauscher Suprasorb CNP P3 Gebrauchsanweisung Seite 129

Proceed as follows:
1. Remove the exudate pouch from the packaging and extend completely.
4. The connection to the wound drainage system can now be established at the exudate
pouch tube. This can be done using either the Suprasorb
Suprasorb CNP deep drain, each with the corresponding connector. Please also follow the
®
instructions for use supplied with these products.
Failure to insert the Suprasorb
damage to the Suprasorb
PLEASE NOTE
2. Insert the exudate pouch loosely into the
reusable container. During insertion, ensure
that the pouch film is inserted into the
container completely and is not trapped at
the edges.
3. Now carefully affix the container system
(Suprasorb
Suprasorb
main unit as shown in the diagram until
it clicks into place completely and is
securely connected.
®
CNP exudate pouch properly may result in leaks or
®
CNP container.
®
CNP container with inserted
®
CNP exudate pouch) to the
®
CNP drainage pad or the
129