Operation By Qualified Healthcare Professionals; Switching The Device On And Off; Screen Saver And Screen Lock; Start Screen - Lohmann & Rauscher Suprasorb Cnp P3 Gebrauchsanweisung

4 Operation by qualified healthcare professionals

4.1 Switching the device on and off

To switch the device on, press
This key can be found below the screen
on the Suprasorb CNP P3 therapy unit (see
®
image). To switch the device off, hold the same
key down until the screen goes black.
Power supply On/Off
The LED of the on/off key will be green when
the Suprasorb CNP P3 therapy unit is
®
switched on. The control LED for the power
supply will be green when the
Suprasorb CNP P3 therapy unit is
®
connected to the mains power supply.
.
Signal off

4.2 Screen saver and screen lock

If the screen goes dark during therapy, it
can be activated again by simply touching
it. However, the editing function will remain
locked. To make changes, unlock by
pressing until

4.3 Start screen

The start screen appears
for a few seconds when the
unit is switched on.
appears.
137