Manually Creating And Configuring A Standard Voip Account For An Auerswald Pbx - Auerswald COMfortel 3500 Inbetriebnahmeanleitung

3.
In the Username entry field, enter the internal telephone number previously
configured in the PBX.
Tip: By tapping the entry field, you can fade in the Android keyboard on the
display. If you press the Back key, the Android keyboard will be faded out,
once more.
4.
Tap on Password and then enter the password corresponding to the inter-
nal telephone number in the Password entry field.
5.
Tap on OK.
6.
Select the country code for the location of the telephone in the list field.
7.
Tap on Area code and then enter the area code for the location of the tele-
phone.
8.
Tap on Numbers and then enter the internal telephone number previously
configured in the PBX.
9.
Tap on OK.
10.
Tap on Default account (standard).
Note: If another account (e.g. a system telephone account) has already
been selected as the default account, select the Not default account
option.
11.
Press the Home key to get to the start page.
Further Steps
Configure a username and a password for the configuration manager (see
Page
Manually Creating and Configuring a Standard VoIP Account for
an Auerswald PBX
Requirements
– Auerswald PBX COMpact 3000 analog/ISDN/VoIP, COMpact 5010 VoIP,
COMpact 5020 VoIP, COMmander Basic.2, COMmander Business, COM-
pact 5000/R or COMmander 6000/R/RX with the following features:
COMfortel 3200/3500 - Firmware Version 1.8B - Setup Guide 04 02/14
The telephone logs on to the PBX. If the registration is performed suc-
cessfully, a corresponding message will be displayed. The telephone is
now ready for use.
65).
Commissioning
61