Configuring Network Settings Manually; Configuring A Standard Voip Account For An Auerswald Pbx Manually - Auerswald COMfortel 1200 IP Inbetriebnahmeanleitung

Commissioning

Configuring Network Settings Manually

Note: When entering network addresses, type the dots between the
numeric blocks as a * (asterisk).
Press the menu key and open the menu System Settings > Advanced
1.
Settings.
Note: If necessary, enter the password for the advanced settings in the
phone (no password in the factory setting).
Scroll to Network > LAN Port > Type and press the OK key.
2.
Scroll to Static and press the OK key.
3.
Scroll to IP, press the OK key and enter the IP address of the telephone.
4.
Press the OK key.
5.
Scroll to Mask, press the OK key and enter the subnet mask.
6.
Press the OK key.
7.
Scroll to GW, press the OK key and enter the gateway.
8.
Press the OK key.
9.
Scroll to DNS1, press the OK key and enter the IP address of the DNS
10.
server.
Press the OK key.
11.
Press the Back key and then press the OK key.
12.
Configuring a Standard VoIP Account for an Auerswald PBX
Manually
Requirements
– Auerswald PBX COMpact 3000 analog/ISDN/VoIP, COMpact 4000,
COMpact 5010 VoIP, COMpact 5020 VoIP, COMpact 5000/R or
COMmander 6000/R/RX with the following features:
i
44
DHCP is switched off.
The telephone restarts with the modified settings.
Available internal VoIP channels
COMfortel 1200 IP - Setup V03 09/2016