Connecting The Receiver - Auerswald COMfortel 3500 Inbetriebnahmeanleitung

Connecting the Receiver

Steps to Take
1.
Insert the RJ-10 connector at the longer, plane end of the spiral cord into
the jack labelled with
2.
Guide the cable to the outside using the corresponding cable channel (see
Fig.
3.
Insert the other RJ-10 connector of the spiral cord into the jack on the re-
ceiver.
Fig. 9: Connecting the receiver
COMfortel 3200/3500 - Firmware Version 1.8B - Setup Guide 04 02/14
9).
on the lower side of the telephone.
Preparation
53