Preparation; Assembling The Feet Of The Casing And Adjusting The Height Of The Telephone - Auerswald COMfortel 3500 Inbetriebnahmeanleitung

This section describes the preparations required before commissioning the device. This
includes the setting of the height and the connecting of the key extension modules (not
included in the package) as well as the receiver and/or headset (not included in the package).
Furthermore, this includes installing the telephone in a suitable location.
Assembling the Feet of the Casing and Adjusting the Height of
the Telephone
Requirements
– Telephone and key extension modules separated from each other
– The feet of the casing delivered with the telephone and the key extension
modules
Steps to Take
1.
If required, remove the feet of the casing from the telephone and key exten-
sion modules.
Fig. 6: Removing the feet of the casing
2.
Reassemble the feet of the casing in the required position.
Note: The feet can be assembled in three different positions within the
marked area.
COMfortel 3200/3500 - Firmware Version 1.8B - Setup Guide 04 02/14

Preparation

Preparation
49