Connecting The Power Supply Plug(S) - Auerswald COMfortel 3500 Inbetriebnahmeanleitung

9.
Repeat steps 5. and 6. for the connected key extension modules.
Fig. 7: Assembling and connecting the COMfortel Xtension30 key
extension modules
Further Steps
Depending on the number of connected key extension modules, you have
to connect one or two power supply plug(s).

Connecting the Power Supply Plug(s)

Notes on the power supply: The power supply for the telephone can
either be provided via the delivered power supply or – if your active network
component (switch or router) supports this – via Power over Ethernet
(PoE).
The power supply for telephones with a single key extension module can
be provided via the delivered power supply.
For telephones with two or more key extension modules, either two power
supply units or Power over Ethernet (PoE) and one power supply are
required.
Warning: Using the wrong power supply plug can result in a life-threatening
electric shock or can damage or destroy or the device.
COMfortel 3200/3500 - Firmware Version 1.8B - Setup Guide 04 02/14
For this reason, only use a power plug of type no. S110001/EU/
ZIS616V (COMfortel 3200) resp. FW7577/EU/40 (COMfortel 3500).
Make sure not to interchange the power plugs:
Type no. S110001/EU/ZIS616V only for COMfortel 3200 and key exten-
sion modules, type no. FW7577/EU/40 only for COMfortel 3500.
Preparation
51