Auerswald COMfortel 3500 Inbetriebnahmeanleitung Seite 63

13.
Tap on Providers & exchange systems.
14.
Tap on the recently created provider (e.g. Auerswald 0).
15.
Tap on Username and then enter the internal telephone number previously
configured in the PBX.
16.
Tap on OK.
17.
Tap on Password and then enter the password corresponding to the inter-
nal telephone number in the Password entry field.
18.
Tap on OK.
19.
Tap on Numbers.
20.
Tap on New number.
21.
Tap on Numbers and then enter the internal telephone number previously
configured in the PBX.
22.
Tap on OK.
23.
Press the Back key two times.
24.
Tap on Country and area code.
25.
Tap on Area code and then enter the area code for the location of the tele-
phone.
26.
Tap on Country.
27.
Select the country code for the location of the telephone in the list field.
28.
Press the Back key.
29.
Tap on Usage.
Further Steps
Configure a username and a password for the configuration manager (see
Page
COMfortel 3200/3500 - Firmware Version 1.8B - Setup Guide 04 02/14
The new provider is displayed under Providers & exchange systems
currently configured (e.g. Auerswald 0).
The telephone logs on to the PBX. If the registration is performed suc-
cessfully, a corresponding message will be displayed. The telephone is
now ready for use.
65).
Commissioning
63