Configuring A Username And A Password For The Configuration Manager (Standard Voip Account) - Auerswald COMfortel 3500 Inbetriebnahmeanleitung

13.
Press the Home key to get to the start page.
Further Steps
Configure a username and a password for the configuration manager (see
Page
For VoIP provider Vodafone: Subsequently, complete the local area code
entry for the location of the account in the Registrar and Outbound proxy
settings (see the operation guide of the telephone).
Configuring a Username and a Password for the Configuration
Manager (Standard VoIP Account)
Attention: Without password protection the configuration
manager is unprotected against attacks from the Internet.
Important: If the telephone is connected to an Auerswald PBX, the
password for the configuration manager is determined by the PBX.
The pasword is identical to the password entered in the PBX. Manual set-
tings are not possible.
Steps to Take
1.
Tap on All apps > Settings > Configuration manager.
Note: Alternatively touch and hold the status line, drag the notification line
down and then tap on the information text The configuration manger is
not protected.
2.
Tap on Username and then enter the username.
3.
Tap on OK.
4.
Tap on Password and then enter the password.
5.
Tap on OK.
COMfortel 3200/3500 - Firmware Version 1.8B - Setup Guide 04 02/14
The telephone logs on to the VoIP provider. If the registration is per-
formed successfully, a corresponding message will be displayed. The
telephone is now ready for use.
65).
You should definitely enter a password to protect your telephone and
your personal data.
Commissioning
65